THE COMPLETE PRACTICAL ROBB PRODUCTION

  • Click to enlarge
THE COMPLETE PRACTICAL  ROBB PRODUCTION

Tap to enlarge

$80.00


Product Information
Specification
NGN7,000/$80

ROBB

 

GLUE

Many modern adherents are bonded best by adhesive containing polymers that is resins because they include surface made from polymers. Historically, polymeric substances have been used as adhesive since man decided to stick two surface together.

Vinyl polymers are very important substances in the production of ‘white glue’.

SULPHUS  OINTMENT

DUSTING  POWDER

Dusting-Powder is usually mixture of 2 more substance in fine powder, and are intended for external use.They may be prepared as described under powder.

Talc kaolin and other natural mineral ingredients are liable to a  heavily contaminated bacteria, including clostridium tetani, clwelchii and Bacillus anthracis.Such ingredients should be sterilized by heating for sufficient length of  time to ensure that the whole of the powder has been maintained at temperature not lower than 1600C for not less than one hour before mixing with the other ingredients.

GUM

In practical terms, gums are either hydrophobic or hydrophobic high molecule weight molecules, usually with colloidal properties, that in an appropriate solvent substance content. Thus, the term gum is applied to a wide variety of substance with ‘gummy’ characteristics cannot be precisely defined.

Most commonly, however, the term gum as technically employed in industry, refers to plant or microbial polysaccharides or their derivatives that are dispersible in either cold or hot water to produce viscous mixtures or soluble.

Some authors have tried to classify separately slimy substances from plants into a category called mucilages. However, it is more logical to consider tackiness and sliminess as the expression of two different physical properties of gums. Tackiness and sliminess are manifestations of two controllable physical properties. It is possible to modify a gum so that tacky properties are withdrawn and mucilaginous properties introduced, the gum remain hydrophilic and capable of giving high viscosity to its dispersions even at low concentration.

TEXTILE DESIGN

CAMPALA DYEING

Dyeing of cloth is the application of dyes on cloth to match whatever designs, we intend to print. Applying the various dyes on the worked out designs and allowing it to soak very well before drying they cloth does this.

 

Kampala printing originated

From Asian countries like Japan, Malaysia, Indonesia and China. In those early days the method consists of suspension and boiling in dye on stuff or soaking for days in the cold solution, the material to be dyed. This method is no longer in practice due to advancement in textile technology. Kampala today has so developed that multi-colours and designs can be printed on particular piece of cloth and so on and so forth. Walking staff, crown and umbrella are commonly printed. Our clothes these days; you should lay your hands on one and make a proper study so that you can get this clearer. Then you pick the challenges of trying your talent on designing with wax and dyes on clothes whether new or old.

Kampala is a trade you need small capital to establish. It is also a product that can go a long way to help you save your incomes as you will spend less money in buying and providing good wears that you would have bought at staging prices.

Your old worn-out material could be dyed making it look like a new one altogether. This will also help you to advertise your product as you wear them about. The risks in Kampala industries are easily corrected.

Vinyl polymers are macro molecule substances formed by polymerization (addition) of those monomolecular organic chemical containing the unsaturated ethylenic or vinyl double bond.

TEXTILE INK (PRINTING INK)

 

Water soluble dye stuff are often required in a concentrated solution for addition to the thickening agent. Solvents or solution assistants are sometimes necessary to ensure complete solution e.g. glycerine Urea, Thiourea, ‘Glydot’ Bru, solution salt S.V. Any chemicals that may be necessary to assist the fixation of the dye stuff are incorporated in the dye stuff solution and added to the thickening agent later. The dyestuff solution or dispersion must be thickened to form printing paste (ink).

 

Note. The useful general rule in the preparation of printing ink is add THIN TO THICK, i.e. solution/dispersion should be added to the thickening agent and not vice versa. This is particularly important with large quantities because it is difficult to disperse a thickening agent in a large volume of dyestuff solution.

METHYLATED SPIRIT

There are two types of methylated spirit.They are (a) mineralized methylated spirit which is 90% recified spirit,1% menthanol and 1% petroleum oil and a purple dye (b) Industrial methylated spirit is 95% recified spirit and 5% menthanol,whose purpose is to denature the recified spirit i.e. make it unfit for drinking purpose.                                                 Make a Bank Deposit or Transfer

 

 

  1. Simply make your payment  to any branch of UBA plc (Bank) in Nigeria

             ACCOUNT NAME;E-TREASURES INFO
             ACCOUNT NUMBER;1003093277

    
       2.  
ACCOUNT NAME:FELIX  DIPE (POLARIS BANK)
             ACCOUNT NUMBER; 1013060598

 

  • Call to inform us or send a text toinfo@e-treasuresinfo.com  or;(+234) 08095643236
  •  will be delivered to your e-mail address within 24 hours  .

             INTERNATIONAL BUYER-(In U.S Dollars 

 

 

 

 

 

 

 

 

 

Product Code1AAJQ68
ConditionNew

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Please enter a valid email address.
This field is required.
Top

©2002-2018 e-treasuresinfo.com - All rights reserved.

Follow Us

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed. Continue if you wish to unsubscribe.
Subscribe
Unsubscribe

©2002-2018 e-treasuresinfo.com - All rights reserved.

eCommerce by CubeCart